![background image](http://html1.mh-extra.com/html/signature-hardware/leland/leland_quick-start-manual_1268725001.webp)
1
Air Tub Installation Instructions
AIR TUB
INSTALLATION
Before you begin, carefully read the installation instructions below. Observe all local electrical safety and plumbing
codes.
Unpack and inspect tub for any shipping damages. If you find damages, do not install. Contact Customer Service at
1-866-855-2284. If you need assistance or have questions while installing your air tub, contact Customer Service.
We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures. Signature Hardware
accepts no liability for any damage to the walls, floor, plumbing, etc. or for personal injury during installation.
Children should always be supervised by an adult when using the air tub.
INSTALLATION
1. Use a 32mm PVC hose to connect the manifold to the
air pump. The air pump should be in a fixed location
prior to tub installation.
2. Connect the air switch to the air pump using a 6mm
transparent tube.
3. Move the tub to the selected installation location. Make
sure the installation location has adequate space to
accommodate your air tub.
4. Use your level to verify that the surface of the tub is
straight. If your tub is not level, lift the tub at one end
and release the foot to adjust the nut. Adjust the nut to
the appropriate height and lock the foot back into place.
5. Install and connect the drain elements.
6. When installation is complete, connect the
electricity at the fuse box.
7. Clean tub from installation debris and dirt and fill
with water.