USER MANUAL
15
If the “*” button is pressed less than one second, the present
temperature setting will be shown for two seconds and then the
display will return to showing the tip temperature. “
▲
”and “
▼
”
are choice button for value. “*” is choice button for digit.
Example: 400
℃
to 350
℃
1.
Press the “*” button and hold it down for at least one second. The left-
most digit (the 100’s digit) in the display will flash. This indicates that
the station is in temperature setting mode and that the 100’s digit can
be adjusted.
2.
Select the desired value for 100’s digit. Use the “
▲
” or “
▼
”
button will change displayed value as follows.
… 2 3 4 …
Press the “*” button when the desired value is displayed. This will
cause the middle digit (the 10’s digit) in the display to begin flashing.
Summary of Contents for QU376D
Page 18: ...BEDIENUNGSANLEITUNG 15...
