USER MANUAL
14
5. Returning Time setting
Press Returning Switch to set the match digit in accordance with
working demand.
Returning Time is designed with one digit. 0 to 9 denotes 0 second to
0.9 second. The resolution is 0.1 second, namely, each digit denotes
0.1 second. The returning speed is fixed with 360º/s.
Example: When the digit is set as 1, the returning time is 0.1 second
and the returning length is 2.8mm. The digit is set as 2, the
returning time is 0.2 second and the returning length is 5.6mm.
When the digit is set as 9, the returning time is 0.9 correct. After
displaying about 4 seconds, the station comes into normal work
state, and the setting temperature will be admitted.
6. Feeding Pressure setting
The solder wire isn’t sent out automatically because of inadequate
feeding pressure, you can adjust Pressure Adjusting Screw on top of
unit to increase feeding pressure clockwise. Solder wire is twisted
because of too strong feeding pressure, you can adjust it anticlockwise.
1.10.
Temperature Setting
Set Temperature Normally
Caution: Make sure the temperature of the station can be
adjusted (password is OK or the password is initial). While
setting the temperature normally, the heating element is off.
Summary of Contents for QU376D
Page 18: ...BEDIENUNGSANLEITUNG 15...
