background image

22                                       Operating Instructions IQ-ONE / IQ-ONE+ 

Bräuniger GmbH 

                                                 display: °F or °C  resolution: 0.1°C  (0.1°F )  

                                                 accuracy: ± 0.5°C, calibration possible 

Time Functions:                        real time clock (12h/24h) with date 

                                                 stop watch up to 99 hrs 59 min 59 sec 

                                                 automatic calendar, automatic logging 

Max. Barograph Recording     130 hours flying time  
Time [IQ-ONE+]:                        recording interval: 1 sec, 5 sec or 15 sec  

                                                   recording of altitude, altitude and speed, or altitude and 

                                                   temperature  

Number of Logged Flights: 

40 with date, start time, flying time, max. altitude and 

min/max vario 

Operating Temperature Range: 5°F to 140°F (-15°C to 60°C) 

Storage Temperature Range:  -22°F to 158°F (-30°C to 70°C) 

 

The technical data may be changed at any time

 

Summary of Contents for IQ-ONE
























Reviews: