Braun VMAX-MIPI, User Manual

Page: 23 / 84

VMAX-MIPI User’s Manual 15 Ver 1.20
BARUN Technology
Corporation
http://www.baruntechnik.com
3. Command SET
3.1. Commands List
MIPI bridge circuit connected to RGB data lines and HS, VS, DE, CLK.
Several instructions are ready. Following table shows MIPI instructions which support MIPI
bridge board.
No. Type Description Para.
1 mipi.board.on Bridge board active. Non
2 mipi.board.off Bridge board shutdown. Non
3 mipi.board.reset Bridge board reset. Non
4 board.reset Bridge board reset Non
5 mipi.gpio0 Set module connector pin 16 ON(1) or OFF(0) 1
6 mipi.gpio1 Set module connector pin 18 ON(1) or OFF(0) 1
7 mipi.gpio2 Set module connector pin 19 ON(1) or OFF(0) 1
8 mipi.gpio3 Set module connector pin 21 ON(1) or OFF(0) 1
9 mipi.gpio4 Set module connector pin 24 ON(1) or OFF(0) 1
10 mipi.gpio5 Set module connector pin 25 ON(1) or OFF(0) 1
11 mipi.gpio6 Set module connector pin 26 ON(1) or OFF(0) 1
12 mipi.write Send MIPI packet.
13 mipi.read Read MIPI module register access. 3
14 mipi.dsi Set MIPI dsi configuration 3
15 mipi.clock.enable Enable MIPI clock output. Non
16 mipi.clock.disable Disable MIPI clock output. Non
17 mipi.video.enable Enter the MIPI video mode Non
18 mipi.video.disable Exit the MIPI video mode. Non
19 mipi.hs.enable Enable MIPI HS mode. Non
20 mipi.hs.disable Disable MIPI HS mode. Non
21 pwrport.on Set module power on the VMAX-MIPI 1~6
22 pwrport.off Set module power off the VMAX-MIPI 1~6
23 pwrbase.on Set Bridge board control signal buffer power ON. Non
24 pwrbase.off Set Bridge board control signal buffer power OFF. Non
25 rgb.sync.enable Enable RGB data output and sync on. Non
26 rgb.sync.disable Disable RGB data output and sync off. Non