Braun VMAX-MIPI, User Manual

Page: 58 / 84

VMAX-MIPI User’s Manual 50 Ver 1.20
BARUN Technology
Corporation
http://www.baruntechnik.com
3.1.8. MIPI Read (mipi.read.iif) Example
Instruction "mipi.read.iif" , *Only support scripts (ON/OFF/UP/DOWN/DEMO/F1/F2/F3/F4)
!! In either "mipi.read.show" or "mipi.read.iif" can be used only one kind of command.
"mipi.read.show" use "mipi.read.iif" for the command result is cleared.
Format mipi.read.iff [P1] [P2] [P3] [P4] [P5] [{P6}] [{P7}] [{P8}] [{P9}];
P1 : Read Buffer Table (0~3)
P2 : Show Bytes count
P3 : DCS Read command
P4 : Read address
P5 : Maximum read count
P6 : Nickname of read address. <- String {}
(** Recommanded the 16Characters )
P7 : Compare Values <- { 256 Values /MAX }
P8 : Match the read data and value when message. <- String {}
(** Recommanded the 16Characters )
P9 : Mismatch the read data and value when message. <- String {}
(** Recommanded the 16Characters )
#====MIPI READ IFF SET ==========================
# Cyan, Black, Transparent, ArialBold22, Left-Top
mipi.read.show.set 7 0 1 3 0;
mipi.read.iif 0 0 0x06 0xE1 5 {DEVICE ID =} {0x01 0x02 } {ID Code OK} {ID Code NG};
mipi.read.iif 1 0 0x06 0xE2 5 {DEVICE ID =} {0x00 0x00} {ID Code OK} {ID Code NG};
mipi.read.iif 2 0 0x06 0xE2 5 {GAMMA =} {0x00 0x00 0x00 0x00 0x00 0x00};
mipi.read.iif 3 0 0x06 0xE2 5;
#==================================================
DEVICE ID = ID Code NG
DEVICE ID = ID Code OK
GAMMA = 00 00 00 00 00
00 00 00 00 00