Either one flashing
<Normal Display>
<Error Display>
Low Battery Voltage A
Abnormal Battery Temperature
Abnormal Motor Voltage A
Abnormal Motor Voltage B
Internal Memory Error A
Internal Memory Error B
Low Battery Voltage B
Power Save Mode
Lighting Display ( On, Off, Flashing)
10. Operation Panel Display
When any abnormal condition occurs in the motor handpiece, the operation panel displays it to allow
you to locate the troubles.
Reason
Lighting Display ( On, Off, Flashing)
Reason
Remedy
Remedy
The battery voltage dropped below
the discharge completion voltage.
(Battery drain)
The battery voltage dropped below
the voltage near discharge completion.
(Temporary voltage dropped due to
battery drain or heavy loading)
Non-operational condition continued
for 1 minute or longer when the rotation
of the motor handpiece stopped.
Recharge the
batteries.
Abnormal temperature at the battery
chamber. (Battery short circuit, over
discharge, etc.)
Abnormal motor voltage.
Abnormal internal memory.
The circuit is
damaged.
Contact
Brasseler USA
The internal
memory is
damaged.
Contact
Brasseler USA.
If the lamps flash after
the handpiece has been
left for a while, Contact
Brasseler USA.
Recharge the
batteries, or
remove the
heavy load.
Press any switch.
No specification
