4
DX3
Series
1.0
Introduction
•
Overview
•
Heater Components
1.0
Introduction
Overview
The intent of this manual is to provide information regarding general safety, installation, operation and
maintenance of the tube heater. You must read, and understand, the instructions and safety warnings in
this manual before installing the tube heater. Additional literature on this and other products is available
at www.brantradiant.com.
Heater Components
Prior to installation, verify that the heater’s gas type and voltage (as listed on the rating plate) match that
of your application. Also verify that you have received all heater contents included with your tube heater.
Reference last page for a list of the kit contents for your model heater. Materials not included in the heater
kit contents (e.g., screws, vent material, terminals, etc.) are the responsibility of the installer. Notify your
product representative or Brant Radiant Heaters Ltd. of any discrepancy or missing kit contents prior to
installing unit.
Tube Hanger
Reflector
Reflector Center Support
10 ft. Primary/
Secondary
Combustion
Chamber(s)
Baffles
Reflector End Cap with Clips
Tube Clamp
Burner Control Box
Type 1 Rubber Hose
Radiant
Tube(s)
Figure 1.1
•
Heater Components*
Igniter/
Sensor Box
Chains are not provided in kit.
Optional accessory. P/N: THCS
16 in. Burner Tube
* Not all items illustrated may be provided with your heater.
Refer to kit contents of the last page of the Series Manual.
Tube Hanger
