InfraRed Thermometer User Manual
12
•When LOG location “0” shows in the display, press the laser/backlight
button. A tones will sound, and the LOG location will automatically
change to “1”, signifying that all data locations have been cleared.
Holding the meter by its handle, point the IR Sensor toward the object
whose temperature is to be measured. The meter automatically
compensates for temperature deviations from ambient temperature.
Keep in mind that it will take up to 30 minutes to adjust to wide
ambient temperatures are to be measured followed by high temperature
measurements, some time (several minutes) is required after the low
(and before the high) temperature measurements are made.
This is a result of the cooling process, which must take place for the
IR sensor.
Note: Measurement considerations
