MANUAL P/N 900000015 REV 1.2
28
5
Uploading Firmware
To upload new firmware for the Network Time Device, the user will need a software application
such as AutoUpdate, the IP address of the Network Time Device, and the file name of the new
released file. Follow the steps listed below to upload new firmware for the Network Time Device.
Please note that AutoUpdate uses unicast on UDP port 20034.
1.
Double click on the AutoUpdate icon and the AutoUpdate V2.0 screen will be displayed.
2.
Enter the IP address of the Network Time Device in the IP address field. If the user does
not know the IP address, press the Find button and the Find Netburners screen will be
displayed. Locate and click on the IP address of the unit and click the OK button. The IP
address field will be completed for you. If the unit is not on the list, click the Search Again
button.
