MANUAL P/N 900000015 REV 1.2
17
4.1.3 Using IPSetup To Set IP Address
To setup the network address using the IP Setup program, follow the steps given below. Please
note that IPSetup uses a local broadcast on UDP port 20034.
1.
Download the IP Setup program from the NetBurner website located at
http://www.netburner.com/support/downloads.html
.
2.
Double click on the IPSetup.exe icon and the NetBurner IPSetup screen will be
displayed.
3.
Verify that the “Select a Unit” displays the current MAC and IP address of the NTV
connected to the network.
4.
Click on the NTV that needs to be configured.
5.
Enter the NDK Settings (IP, Network Mask, GateWay, and DNS).
6.
To transfer the NDK Settings to the selected NTV, click the Set
Æ
button.
7.
Wait 15 seconds for the NDK Settings to be loaded into the NTV and for the NTV to
restart.
8.
Verify that the NTV has the correct NDK Settings and is connected to the network by
clicking the Search Again button.
9.
To exit the IP Setup program, click the Close button.
