•DETAILS OF THE OPTIONS
•Prewash
Specially designed for heavily soiled washing (mud, blood, etc.).
A specific initial agitation in cold water precedes a phase of heating to
30°C.
This agitation phase in cold water enables the particles soiling the washing
to be removed before the water is heated.
Important :
Detergent must be placed in the " " container in the products
box.
•Intensive
This function enables you to handle so-called ‘difficult’ stubborn stains.
•Rinse plus
"Especially for sensitive and allergic skin": adds an extra rinse to the
washing cycle.
•Easy Ironing
This avoids the washing creasing and makes it easier to iron.
•Full drum stop
This function enables you to remove the washing from your machine
before the spin phase or to delay this phase with you washing remaining
in water to prevent creasing.
NB:
When the machine is stopped with the tub full of water, there are
two possibilities:
—
If you are in “Finishing Time” mode, the
screen shows the “Current Time” and
flashes alternately between the “
Pause
”
segment and the 4
th
cycle progress
segment respectively.
—
If you are in “Remaining Time” mode,
the screen shows “
0.00
” and flashes
alternately between the “
Pause
”
segment and the 4
th
cycle progress
segment followed by the “Remaining
Time” symbol
respectively.
Then:
— Either you want to drain after spinning.
In this case, use the knob
to choose a suitable spin speed for your
type of washing.
The programme will end automatically.
— Or you just want to drain.
In this case, use the knob
to select the “Drip Dry” function (indicator
light “
100
”).
•MODIFYING A WASHING PROGRAMME
•During programming:
Everything can be altered before the “Start/Pause” button
is
pressed.
Information:
Audible aid:
When you make alterations during the washing cycle of washing,
your washing machine emits:
—
A “Beep” for every authorised modification
—
A “Beep Beep” for every unauthorised modification. In this case,
select another programme.
We provide below the main programme alterations you can make.
•Throughout the cycle:
Depending on your model, the following changes are possible without
pressing the “Start/Pause” button
.
— You can change the temperature for the same type of textile.
NB:
If the temperature achieved by the washing cycle is higher than your
new selection, heating the water stops immediately and the cycle
continues.
— You can alter the spin speed throughout the cycle.
— You can select “Drip Dry” and “Full Drum Stop” throughout the washing
phase..
— You can activate the “Extra Rinse” option until rinsing starts (until
the 3
rd
cycle progress segment is displayed).
— You can deactivate all the options throughout the cycle provided
that their action has not already finished.
•During the period before the cycle actually starts
(if you
have chosen to delay the time your washing starts):
— Any kind of programme modification is accepted during the waiting
period.
— You can alter the length of the delayed start or the “Finishing Time”
throughout the waiting period before the cycle actually starts. To do
this, turn the adjustment knob
to a new value.
NB:
—
During this period, selecting a new value cancels out the previous
selection. The new value is taken as the last selection made.
—
If you want to make an immediate start during this period, turn the
adjustment knob
to the left until the display locks:
-
On the closest finishing time (current time + cycle time), if you are in
“Finishing Time” mode
-
On “
0
”, if you are in “Delayed Start” mode.
Then, briefly press the “Start/Pause” button
.
The cycle will start immediately.
— You can only activate the “Prewash” and “Easy Ironing” or “Intensive”
options during the waiting period for a “Delayed Start” or a “Finishing
Time”.
•When the cycle is over:
When the screen
shows “
Stop
”, you can programme a new cycle
without having to press the “On/Off” button
again.
To do this, all you need to do is to turn the selector
or press one of
the following buttons:
, , or .
The screen returns to the most frequently used configuration.
The machine is then ready to be reprogrammed.
•AUTOMATIC SAFETY SYSTEMS
•Lid opening safety system:
As soon as washing commences, the lid on your machine is locked.
When the cycle is finished or when the machine has stopped with the
drum full of water, the lid unlocks.
If you have selected a delayed wash, the lid remains unlocked throughout
the waiting period until the cycle actually starts.
If you wish to open the lid during the cycle, press button
briefly
and wait 1-2 minutes for the safety system to unlock the lid.
Important:
Depending on when you wish to open the lid during the cycle,
this time delay may be a little longer because a cooling down period
may also have to be included.
In fact, to avoid your being severely burnt, the lid safety system will
not open during the cycle unless the temperature inside the machine
is below a certain threshold.
•Water safety system:
During operation, constant control of the water prevents any overflows.
•Spin safety system:
Your washing machine is fitted with a safety system that restricts the
spin when poor load distribution is detected.
In this case, your washing may be insufficiently spun. Redistribute
your washing in the drum and programme a new spin.
•Anti-foam system:
You machine can detect when too much foam is being produced during
spinning.
At such times, spinning stops and the machine drains.
The cycle then restarts, adapting the spin rates and possibly adding
an extra rinse.
2
5
4
3
2
1
8
A
2
7
7
2
2
4
4
23
4 / PROGRAMMING YOUR MACHINE
EN
Summary of Contents for WTC1084K
Page 15: ......
