20
EN
4 / PROGRAMMING YOUR MACHINE
•SETTING THE FUNCTIONS
•Setting the “Finishing Time”:
Important:
Before you can use the “Finishing Time” function, you must first have set the “Current Time”
on the clock.
— Press the “On/Off” button to switch on your machine.
— If the “Finishing Time”
is not already shown on the screen, press button
to select this function.
NB:
The time displayed on the screen represents the current time plus the duration of the selected
programme; you therefore cannot advance this.
—
On the other hand, you can delay the time using button
(the setting is made in 15-minute periods
based on 24 hours).
NB:
The “Finishing Time” remains fixed until the end of the programme.
Information:
Certain occurrences during operation (for example: detection of imbalance, foam, etc.) can
cause the cycle’s duration to vary. In this case, the “Finishing Time” is updated automatically.
•Setting a “Delayed Start”:
— If you prefer to delay the cycle by delaying the starting time, use button
to select the “Delayed
Start” function
.
— Use button
to set the delayed start’s duration (this is set hour by hour, from 1 to 24 hours).
NB:
For a “Delayed Start” of more than 1 hour, the countdown is hour by hour up to 1 hour and then
minute by minute.
When the countdown is complete (when the cycle actually starts), the “Time Remaining” function
is
displayed.
•Displaying “Time Remaining”:
— If you are in “Finishing Time” mode
and wish to see “Time Remaining”
displayed, simply use
button
to select this function.
This provides:
- During the cycle, the time remaining before the end of the cycle.
- During the waiting period before the cycle starts, the time remaining before the cycle actually starts
(rounded to the next hour).
— “Time remaining” is also displayed, without any action on your part:
- As soon as you start the washing machine, unless you were in “Finishing Time” mode during the
previous cycle.
- At the end of a “Delayed Start”, as soon as the cycle actually starts.
•Selecting the type of textiles:
To select the type of textiles or a particular programme (Rinse, Spin, etc.), turn the knob
until the
indicator light for the desired programme lights up (for more details, please refer to the section
“PROGRAMME DETAILS”).
•Setting the temperature:
When you have selected the type of textiles or a particular programme, your washing machine proposes
the most suitable washing temperature for the programme.
You can alter the suggested temperature by repeatedly pressing button
briefly.
•Setting the end of the cycle
(spinning, draining, etc):
Your washing machine similarly automatically proposes the maximum authorised spin speed for the
selected programme.
By pressing briefly each time on button
:
— Either select a different spin speed
— Or drip dry
.
The cycle will end with a gentle spin at 100 rpm.
— Or select stopping with the tub full
.
Your machine will stop with the tub full of water before the final spin.
•Selecting the options:
To select the options, press one or more of the “Options” buttons
(for more details, please refer to
the section “DETAILS OF THE OPTIONS”).
5
A
4
3
1
6
7
6
7
6
Display
or
A
Information:
For each of the above, the machine only proposes the values or options compatible with the selected programme.
100
100
100
Summary of Contents for WTC1084K
Page 15: ......
