18
EN
4 / PROGRAMMING YOUR MACHINE
Function selection:
short press
Update of current
time: long press
Spin speed adjustment
On/Off
LCD screen
Type of textiles
Temperature adjustment
•DESCRIPTION OF THE CONTROL PANEL AND THE LCD SCREEN
•USE
Advice:
Familiarise yourself with the
operation of the buttons, the knobs
and the screen.
Programme the current time when you
first switch on or after a power failure.
Set your programme after you have
put your washing in the machine.
•OPERATION OF THE
CONTROLS
— All the buttons are micro-switches
and do not remain depressed.
— The “Time modes” button
should
be pressed only briefly each time except
when updating the current time, in
which case it should be kept held down.
(*) Details of this function in the
following pages.
— The adjustment knob
rotates.
Once you have selected a particular
function, it is used to modify the
parameters. Turning it in a clockwise
direction increases the values
displayed; turning it counter-clockwise
reduces the values.
•Confirm/Pause:
— The “Start/Pause” button
is used
to confirm the program you have
chosen and temporarily to stop a cycle
while it is running.
•
Cancel:
— You can cancel your selections at any
time by pressing the “On/Off” button
.
8
2
7
6
8
Function setting knob
7
A
3
4
6
1
Start/Pause
2
Options
Children’s safety
+
5
Door safety system
Display
Current time
Finishing time
Delayed start
Remaining time
Others
Programme progress
Children’s safety
Incident warning
light
Spinning
Rinsing
Washing
Pre-wash
Pause
Tap safety system
Functions
Finishing time
Delayed start
Remaining time
•DETAILS OF THE VARIOUS DISPLAYS ON THE LCD SCREEN
•
Current Time
(no function symbol displayed)
This function enables you to set your washing machine’s clock. You must do this to be able to use the
“Finishing Time” Function.
•
Finishing Time
This function shows the time when your cycle will finish. It also enables you to delay the cycle finishing
time, for example to avoid:
— The wet washing having to wait in the drum until you return.
— The final spin taking place during the night...
•
Delayed Start
This function enables you to program a washing cycle to start at the time you wish, for example:
— To distribute consumption of electricity between appliances,
— To make optimum use of the off-peak hours offered by your electricity provider.
•
Remaining Cycle Time
This function tells you the length of your programme while programming and the time remaining
before the cycle finishes while it is running.
•
Other Displays
The LCD screen also displays other messages for your information or assistance. You will discover what
these mean on the following pages.
•
Display indicating the waiting period before the cycle actually starts:
If you have chosen to delay your washing cycle (either by selecting a later finishing time or by delay
the start), the 4 segments in the upper section run from left to right and then from right to left throughout
the whole period from when you confirm your programming to the time the cycle actually starts.
Display
Summary of Contents for WTC1084K
Page 15: ......
