•
Your detergent consumption will change according to the dirtiness
level of your clothes. For your slightly dirty clothes, do not pre-wash
and put a small amount of detergent in the compartment no.2 of the
detergent drawer.
•
For your excessively dirty clothes, select a program with pre-
washing, fill ¼ portion of the detergent you will put in compartment
1 in the detergent drawer and the remaining portion in compartment
2.
•
In your machine,use the detergents developed especially for
automatic washing machines. The quantities that will be used for
your clothes are written on the packing of the detergents.
•
As the hardness of your water increases, the amount of the
detergent to be consumed will also increase.
•
As the amount of your clothes increases, the amount of the
detergent to be consumed will also increase.
•
Fill your softener in the softener compartment in your detergent
drawer. Do not exceed the MAX level. Otherwise, the softener will
diffuse in the washing water via the siphon.
•
The softeners with high density should be diluted with some water
before filling in the drawer. That is because the softener with high
density obstructs the siphon and prevents the flow of the softener.
•
You can use fluid detergents in all programs without pre-washing.
For this, mount the fluid detergent level plate in the second
compartment of the detergent drawer and arrange the amount of
fluid detergent according to the levels on this plate.
RUNNING THE MACHINE
Program Selection and its features
Select the program and functions appropriate for your clothes from Table-1.
On/Off
By pressing this button, you can start the program you have selected or end a
program in operation.(When you repress the same button, the program will
continue from where it remained.)
Starting the program
•
Adjust the program knob to a program which you desire.
•
If you want, you can select one or more of the additional functions.
•
Operate the program you have selected by pressing the on/off button.
Changing the program
If you have selected a program which you do not want:
•
Press the on/off button.
•
Adjust the program knob to the program which you desire.(You can
select the program you want from Table-1).
•
Run the program you have selected by pressing the on/off button.
13
