Cancellation of program
If you want to end an operating program early:
•
Press the on/off button.
•
Bring the program knob on one of the “Draining” or “Spinning”
programs, whichever you want.
•
Operate the program you have selected by pressing the on/off button.
Program Ending
•
Your machine will stop automatically when the program you have
selected ends.
•
Shut-off your machine by pressing the on/off button.
•
Close the water tap.
•
The door lock of your machine will open by itself in approximately two
minutes after the program ends.You can open the door by pulling the
handle of the door towards yourself and take out your clothes.
•
After you unload your clothes leave the door open for drying of the
interior of your machine.
•
Unplug your machine.
WARNING!
In case that the electricity goes off and is on again after a while on any stage
of the washing programs, your machine will continue the program from the
point where it was interrupted. This situation has no harm on your machine.
SECTION 6: MAINTENANCE AND CLEANING
•
Unplug your machine.
•
Close the water tap.
WATER INLET FILTERS
On the tap part of your machine’s water inlet hose and at the ends of water
inlet valves, there are filters to prevent entrance of the dirt and foreign
materials in the water to the machine. If the machine is unable to receive
sufficient water although your water tap is opened, these filters should be
cleaned.
•
Remove the water inlet hose.
•
Remove the filters found on the water inlet valves by using a pincer
and wash thoroughly with a brush.
14
