24
2 / INSTALLING YOUR DISHWASHER
EN
B J
P =
Fig. 10.2
P
P
E
Fig. 10.1
• REFITTING THE PLINTH
Refit the plinth, cutting it away if necessary
according to Dimension
P
(see table and Fig.
10.1)
Calculate dimension P (Table on last page):
- Take Dimension
B
from Fig. 6.1 and measure
the gap
J
between the floor and the bottom of
the dishwasher. Calculate
B - J
.
- Measure the plinth depth
E
(Fig. 10.1) bet-
ween the unit’s plinth and front of the unit.
Take the value for
P
from the table provided by
E
and
B – J
(e.g. if
E = 100
and
B – J = 140
,
then
P = 23
).
- Cut away the plinth across a width of 600mm
to the depth for the value for
P
.
If there will be a specific plinth for the dis-
hwasher, you must obtain a separate fixing
kit (32X3252) from the After-Sales
Department. In this case, the plinth height is
H = B - P
(Fig. 10.2).
Cut-away depth
• TABLE FOR CUTTING AWAY THE PLINTH
