23
EN
2 / INSTALLING YOUR DISHWASHER
Warning:
The screw provided is intended for a
panel at least 16mm thick. If the panel is less
than 16mm thick, change the screw or shor-
ten it.
Fig. 9
•
SOUND-PROOFING SEALS
To improve the built-in appliance’s sound-
proofing, fit the sound-proofing seals (depen-
ding on the model). (
on Fig. 8)
If the recess is bigger, stick on seal
using
the adhesives provided.
If the appliance is laterally secured, a cut must
be made in the seals'
heels to allow the
retaining brackets to be passed through (nip-
per).
P5
P5
P11
P5
Danger:
If your worktop has a hob fitted above your dishwasher, you must fit thermal insulation
on top of your dishwasher. You can obtain an insulation kit from your dealer. Remember to
leave a space between the gas pipe and the top of your dishwasher.
•
APPLIANCES BUILT-IN UNDER A HOB
• FIXING IN THE NICHE
Fasten the dishwasher under the worktop
with the screws
(see Fig. 7) or using the
flanges you have unfolded (Fig. 3.2).
P9
• BALANCING THE DOOR (LEFT
AND RIGHT)
Adjust the tension on the springs, if neces-
sary, to compensate for the weight of the clad-
ding panel. Adjust them identically on the right
and the left (Fig. 9).
The door is correctly balanced when it dopes
not fall heavily on opening and it remains hori-
zontal in the open position.
Fig. 7
Fig. 8
