Brandt TG1089XC, Installation Instructions Manual

Page: 6 / 22

6
- Caustic solutions, washing soda, aerosol spray cleaners, bleach and some biological
cleaners are detrimental to some surface finishes and care must be taken not to apply
them to the burner bodies and caps.
- Do not wash burner caps in a dishwasher
-
For ease of cleaning, remove spillage from the bowls as soon as possible. Control
knobs may be pulled off for cleaning beneath them, but take care not to allow water to
enter the holes in the glass plate.
-
When re-assembling the spillage bowl always ensure that it is correctly located over the
spark electrode. Care should be taken to keep the electrode clean and avoid damage to
the porcelain insulator when removing the spillage bowl during cleaning.
HINTS ON THE USE OF THE DOMINO
Utensils should always be placed centrally on the pan supports and over the
burners.
Flames, which extend beyond the bottom of utensils are wasteful and can damage
or overheat handles. Large diameter utensils (greater than 200mm in diameter)
must not be allowed to protrude beyond the perimeter of the Domino, as this could
cause overheating or damage to the adjacent bench.
Do not place anything, e.g. flame tamer, asbestos mat,
between pan and pan support as serious damage to the
appliances may result.
Do not remove the pan support and enclose the burner
with a wok stand as this will concentrate the flame and
deflect the heat onto the Domino.
Do not use large pots or heavy weights, which can bend
the pan, support or deflect the flame onto the Domino.
Locate pan centrally over burner so that it is stable and
does not overhang the appliance.
Use only wok support supplied or recommended by the
manufacturer of the appliance.