11
5.
TROUBLE SHOOTING GUIDE
Here are the steps to follow if you experience problems with the product.
The appliance does not work
•
Make sure that the unit is plugged in correctly.
Check the electrical socket by plugging in another
appliance.
• Check if the cable or plug is damaged. If so, do
not try to work it again.
The unit does not create a complete vacuum
inside the bags
•
The open end of the bag should remain
completely inside the vacuum channel area.
•
Check for impurities in the sealing seals and the
seals. Clean them and put them back in the correct
position.
•
The bag could have a hole in it. To check this,
seal the bag with some air inside, submerge the bag
in water and squeeze it. Bubbles will indicate that
there is a leak. Seal it again or use another bag
The bags have not sealed correctly
• The cause could be the sealing bar overheating
or the bag has melted. Open the cover and let the
sealing bar cool for several minutes.
The bag did not maintain the vacuum after
being sealed
• This can be caused by a leak due to wrinkles,
crumbs, fat or liquid. Open the bag, clean the upper
part and remove any foreign matter from the sealing
bar before trying to seal it again.
FagorBrandt SAS – Management Company - SAS with a capital of 20,000,000 Euros- Head Office: 7 rue Henri
Becquerel - 92500 Rueil-Malmaison - RCS Nanterre 440 303 196
