61
Building in – Reversing the door
Your dryer can be recessed. See the drawing
below (A) for recess dimensions.
• For safety reasons, a metal top must
be applied to the top of your dryer.
You can obtain one from your dealer.
• Make sure the dryer is unplugged
before carrying out the following
operations.
Proceed as follows:
- unscrew and remove the screws on the
rear of the work top;
- push the work top back till it stops;
- lift the work top off;
- unscrew and remove the plastic pins (1)
on the side walls of the dryer and remove
the tie-rods (2);
- fit on the metal top (3) which ensures
protection in the case of accidental contact
with live parts;
- position the dryer in its recess, aligning
it with the adjacent units and making sure
it is completely underneath the work top.
3
1
565
600
595
600
829
830
2
Reversing the door (B):
If you wish, you can change the way the
door opens, as follows:
- remove the four screws (1) in the front
panel fixing the hinges (2) of the door (3);
- move the micro-switch activator (5) from
position (a) to position (b);
- move the plugs covering the holes from
position (6) to position (1);
- mount the door on holes (6).
1
6
1
3
5(a)
2
5(b)
B
A
