background image

60

Installation area (A):

Your dryer emits heat. If you put it next
to another appliance or item of
furniture, we recommend leaving space
between the two for air to circulate (A).

We strongly advise against:

-

installing your dryer on a carpeted floor.
If you can’t avoid doing so, take the
necessary steps to ensure adequate
circulation of air under the base.

-

installing your dryer where it may be
exposed to splashes of water;

-

installing your dryer in a small closed room
(if this is the case, open a door or window
during the drying cycle);

-

installing your dryer in an inadequately
ventilated room; ambient temperature
should be under 35° C during drying.

Levelling (B):

Use a level to check the floor is horizontal.
The maximum allowed inclination is 1.5° (ie.
about 1 cm with respect to the width and
depth of the dryer).
Your dryer has four adjustable feet (B).

To adjust level and stability:

-

tip slightly backwards;

-

use a wrench or pair of pliers to screw or
unscrew, depending on the floor, one or
more of the feet to adjust height (B);

-

put the dryer back on four feet and check
stability.

Installing your dryer

A

B

Summary of Contents for EFM505K
















Reviews: