67
Routine maintenance
It’s important to remember that the filter
must be cleaned after each cycle.
The filter is in the bottom part of the opening
of your dryer.
To clean it:
- pull the filter upwards out of its housing
(A);
- clean it by removing the thin layer of fluff
covering it (B)
Use a piece of crumpled plush fabric to
remove fibres from the filter.
Under no circumstances must it be
cleaned with water (C).
- replace it in its housing , pushing down well.
Cleaning the dryer:
The only acceptable way to clean the control
panel, the access to the drum and the bodywork
is with a wet sponge or cloth and some liquid
soap.
In any case,
never use
(E):
• abrasive powders;
• metallic or plastic pads;
• alcohol based products (alcohol, diluents, etc.)
Cleaning the humidity probes (D):
If you have an electronic dryer, a layer of scale
may deposit on the probes (inside the drum, on
top of the stainless steel blade). Remove by
wiping the probes with a cloth soaked in vinegar
C
D
E
Cleaning the filter
Once every six months, hoover the vents
at the front and back of the machine to
eliminate dust and fluff.
B
A
