Brandt BPI6413BM, Manual For Installation And Use

Page: 6 / 32

6
SAFETY GUIDELINES EN
— If the power cable is
damaged, it should be
replaced by the manufacturer,
its after-sales service
department or by a similarly
qualified person in order to
avoid danger.
— It is recommended to avoid
placing metal objects such as
knives, forks, spoons and lids
on the cooking surface, as
they may heat up.
— After use, turn off the cook
top using its control device
and do not rely on the
saucepan detector.
— This unit is not intended to
be operated using an external
timer or a separate remote
control system.
— WARNING : It is
dangerous to cook with oil or
fat if the hob is left
unattended, as this may cause
a fire. Do not attempt to
extinguish a fire with water
but switch off the appliance,
then cover the flame with a lid
or a fire blanket.
— The use of a gas cooking
appliance produces heat and
humidity in the room where it
is located. Ensure that the
kitchen is well-ventilated:
keep mechanical ventilation
orifices open.Intensive and
prolonged use of the
appliance may require
additional ventilation, for
example opening a window, or
more efficient ventilation, for
example by increasing the
power of the mechanical
ventilation if present.
— WARNING:
Only use hob
protectors designed by
the manufacturer of these
cooking appliances or
recommended by the
manufacturer in the user
guide included with the
appliance. Use of
unsuitable protectors
could cause accidents.
Only use protection
systems designed by the
manufacturer of the
cooking appliance or
systems mentioned by the
manufacturer of the
appliance in the user
guide for the intended
use, or use the protection
system integrated into the
appliance. Use of
unsuitable protection
systems could cause
accidents.
Fire hazard: Do not
store objects on the
cooking surfaces.
— CAUTION: The cooking
process must be
monitored. A short
cooking process must be
continuously monitored.
— CAUTION:When not
monitored, cooking on a
cooking plate with fat or
oil can be dangerous and
may cause a fire.
We do not recommend using
any hob protection
mechanism.
If the power supply lead is
damaged, it must be replaced
by a H05V2V2F cable and
three 1 mm 2 conductors.