14
2 / INSTALLING YOUR APPLIANCE
Change the injectors
, proceeding as
follows:
— Remove the an support, the burner
cover, and the burner head.— Using a
No.10 spanner, unscrew the central injector
located at the base of the burner unit (see
A
) and using a No. 7 spanner, unscrew
the 3 injectors located around the central
injector (see
B
) Fig. 01.
— Replace the corresponding gas injectors,
in accordance with the positioning of the
injectors and the gas characteristics table
shown at the end of this section. To do this :
First screw them in manually until the
injector locks into place.
Apply the spanner to the injector.
Turn the spanner clockwise.
Warning
Screw on the adaptor with a
torque not exceeding 4 N.m.
Exceeding this limit may damage the
product.
Fig. 01
B
A
B
Summary of Contents for BPG6308 Series
Page 1: ...GUIDEFORINSTALLATIONANDUSE EN Cooking hob BPG6308...
Page 23: ...23...
