Brandt BPG6308 Series, Manual For Installation And Use

Page: 9 / 24

9
2 / INSTALLING YOUR APPLIANCE
M i n i
4mm
Mini 40 cm
2
Fig. 02
• FITTING TIPS
A
Mounting holes
Gas hob
Front of
cabinet
Services
space
80 mm
mini
100
mm mini
Worktop
Fig. 03
— If you wish, you can immobilise the
hobusing the four mounting brackets
delivered with their screws, fi xed to the
four corners of the casing. You must
use the holes provided for this purpose,
according to the diagram above (Fig. 01).
— Stop screwing when the mounting
bracket starts to become deformed.
Do not use a screwdriver.
Fig. 01
Underside view of the housing
A
A
A
• CASE OF FLUSH FITTING
ABOVE A DRAWER, OF A
CABINET WITH A DOOR OR
DRAWER
• Above an empty cabinet or a drawer
(Fig. 02).
Fitting your hob above an oven requires the
oven to be fi tted low. It is recommended
that the hob not be installed above an oven
if the oven’s ventilation is not frontwards.
Create an air vent in the partition to the
right or left of the oven, of 40 cm
2
.
Brackets
Screw
Worktop