Basic Operation
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to go to the following channel.
• Using 0- 9 numeric buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select a one-digit channel (e.g. Channel 5): Press 5.
Volume adjustment
•
Press the
VOL+/-
button to adjust the volume.
•
If you want to switch the sound OFF, press the .
•
You can release mute by pressing the
again or by increasing the volume.
Changing the Input Source
You can select the input source by pressing the
SOURCE
button on the remote control.
Press the
▲
/
▼
button to cycle through the input sources, and press the
ENTER
button
to confirm your choice.
How to Navigate Menus
Before using the TV follow the steps below to learn how to navigate the menus in order
to select and adjust different functions. The access step may differ depending on the
selected menu.
1. Press
the
MENU
button to display the main menu.
2. Press
the
◄
/
►
button to cycle through the main menu. You can choose between
Picture, Sound, Channel, Lock System and Setup.
3. Press
the
▲
/
▼
button to highlight the desired sub item.
4. Press
the
ENTER
button to access the submenu.
5. Press
the
▲
/
▼
/
◄
/
►
button to select the desired value. The adjustment in the
OSD may differ depending on the selected menu.
6. Press
the
MENU
button to return to the previous menu.
7. Press
the
EXIT
button to exit the menu.
NOTE:
When a menu item is greyed out, it means that the item is not available or cannot be
adjusted.
Buttons on the TV have the same function as corresponding buttons on the remote
control. If you lost your remote control or if it is not working, you may use the buttons
Some items in the menus may be hidden depending on modes or signal sources
used.
on the TV to select menus. This manual focuses on operation with the remote control.
However, please note the following when navigating via the buttons on the TV control
,
panel: CH+ can be used to go up, CH- to go down, VOL+ to go right and VOL- to go
left.
Press CH- to go to the preceding channel.
To select a two-digit channel (e.g. Channel 20): Press 2 and 0 in a short time.
17
Downloaded from www.vandenborre.be
