English
- 55 -
Remote control - does not operate
• The batteries may be exhausted. Replace the
batteries.
Input sources - cannot be selected
• If you cannot select an input source, it is possible
that no device is connected.
• Check the AV cables and connections if you have
tried to connect a device.
• Check that the required input source is enabled
(Menu – Settings – Sources).
Recording not available
To record a programme, you first have to connect your
USB device to your television while the TV is switched
off. You should then switch on the TV to enable
recording feature. If you cannot record, try switching
off the TV and then re-inserting the USB device.
USB is too slow
If a “USB is too slow” message is displayed on the
screen while starting a recording, try restarting the
recording. If you still get the same error, it is possible
that your USB disk does not meet the speed
requirements. Try connecting another USB disk.
Teletext
Press the button to enter teletext mode. Press again to
enable the Mix mode. Press one more time to exit. Follow
the instructions displayed on the digital teletext screen.
Digital teletext (United Kingdom only)
Press on the
button to display information related
to the digital teletext. Use the coloured buttons, the
cursor buttons and the
OK
button to adjust. The operating
method may differ, depending on the content of the digital
teletext. Follow the instructions displayed on the digital
teletext screen. When the
button is pressed, TV
switches back to television broadcast.
Downloaded from www.vandenborre.be
