Getting started
English
- 48 -
Turning the TV on
Turning the TV on
Connect the power cord to a 220-240V ~ 50 Hz socket.
To turn on the TV from standby mode, you can either :
• Press the “ ”,
P+
/
P-
button or a numeric button
on the remote control,
• Press the side control button until the TV leaves
standby mode.
Turning the TV off
Press the “ “ button on the remote control or the
control button on the side of the TV until the TV enters
standby mode.
To turn off the television completely, unplug the
power cord from the power socket.
Note
: When the television is
in standby mode
, the indicator
light flashes to indicate that options such as
Standby search
mode
,
automatic download
or
Timer
are enabled. The
LED may also flash when you turn on the television from
standby mode.
First time installation
When you turn on the television for the first time,
the language selection menu appears. Select the
language you want and press
OK
.
The First time installation (FTI) screen appears
during first installation. Set your preferences using
the navigation buttons. When you are finished, press
OK to continue.
IMPORTANT :
If you select France or Italy as country
option, the PIN code menu will appear and you will
have to enter 4-digit code. You will not be able to use
0000 as code (you are advised to write down this
code. Enter a PIN code and enter it again to confirm
(you are advised to write down this code on your
instruction manual so that you can remember it when
you need to use it). Press the
OK
button to continue.
WARNING :
When prompted to enter a PIN code to
access a menu item, you have to use the code you
set during first installation. If you forget the said code,
use the main code
4725
.
Demo Mode
If you want to use your television at home, you are
advised to select the Home mode.
If you choose the Store mode, you will have to confirm
your choice.
Choosing TV receiver mode
You will have to choose your reception mode, antenna
or cable. If you choose the
AERIAL
option from the
Type of search
screen, the digital television will
search for digital terrestrial broadcasts.
NOTE
: You can press the
MENU
button to cancel.
Once all the available channels have been saved, the
channel list will appear on the screen. If you require
the channels to be sorted according to the LCN(*),
select Yes, then press
OK
.
Press the
MENU
button to exit the list of channels
and watch television.
(*) LCN is the Logical Channel Number system
that displays channels in the order established by
government agencies .
Installing the cable
If you choose the
CABLE
option and press the
OK
button on the remote control, you can set
the frequencies manually or press
OK
to start an
automatic search.
Note
: The duration of the search will depend on the search
zone selected.
Reading media through the USB input
You can connect external hard drives (hard drives with or
without external power supplies, depending on their voltage)
or a USB port to your TV through your TV's USB ports.
IMPORTANT!
Backup your files before making any
connection to the TV. Note that the manufacturer
shall not be held accountable for any file damage
or data loss. Some types of USB devices (MP3
players for example) or USB ‘‘
hard drives / memory
cards’’
may be incompatible with this television. This
television supports FAT32 and NTFS disk formatting.
However,
you will not be able to record with NTFS
formatted disks.
If your hard drive's capacity is above 1TB (terabyte),
you may experience some issues with formatting.
Avoid disconnecting your reader quickly after inserting
it in the television's USB port. This can physically
damage the USB reader and the USB device itself.
Never remove the USB while a file is being read.
First time installation - USB connections
Downloaded from www.vandenborre.be
