INSTALLATION INSTRUCTIONS
5 of 6
GS
Section 3: Chassis Harness Installation continued
21.
Route the exterior portion of the supplied
chassis harness along existing vehicle
chassis harness and over fuel tank. Use zip-
ties to secure the harness to existing wiring
at 2-inch intervals.
Figure 11
Figure 12
22.
Loop any excess from the harness as shown
and secure with zip-ties.
Figure 13
23.
Line up the arrows on the top of the
connectors, and plug the 4-pin camera
harness connector installed earlier under the
pickup bed into the 4-pin chassis harness
connector.
Figure 14
