2a
1
2c
2b
English
First Steps
33
Wear protective clothing, eye protection and gloves! Follow all safety
instructions and observe limitations of use and operating limitations
(pages 28-30).
Check the discharge tube for a tight fit.
After two days tighten up the locking
nut(s).
Note:
Warning:
Assembly
Adapters for bottle thread
Filling tube length
seripettor
®
GL 32-33, GL 38, S 40
250 mm
seripettor
®
pro
GL 32-33, GL 38, S 40
125 - 240 mm
Is everything in the package?
Confirm that your package includes:
seripettor
®
:
Pump assembly seripettor
®
, valve block with discharge tube (pre-assembled), filling tube, 2x dispensing
cartridge, 3x bottle adapters (PP) and this operating manual.
seripettor
®
pro:
Pump assemblx seripettor
®
pro, valve block with discharge tube (pre-assembled), telescoping filling tube,
2x dispensing cartridge, 3x bottle adapters (PP), mounting tool and this operating manual.
2.
Mount pump
assembly
Screw dispensing cartridge into valve
block (Fig.1).
1.
Unscrew dispens-
ing cartridge
a)
Open piston lock on the pump as-
sembly (Fig. 2a).
b)
Put pump assembly over the dispens-
ing cartridge and screw it down to the
valve block (Fig. 2b).
c)
Depress pump assembly up to the
lower stop and keep holding it using
one hand and with the other hand,
close piston locking on the pump as-
sembly (Fig. 2c).
d)
Release pump assembly and check
to see whether the piston in the dis-
pensing cartridge has moved upward.
