Brainlab KICK 2, System And Technical User Manual

Page: 73 / 136

6.5 Transporting the Monitor Cart Inside the Hospital
Protection Covers
Brainlab provides:
• Monitor protection cover
• Camera protection cover
The protection covers must be used during transport and storage to protect the sensitive
components from damage. Remove the cover before entering the OR.
Parking and Transport Position
• Protection cover must be attached to the monitor.
• The monitor tilted must be back
• Mains power cable and any other cables that shall remain attached to the Monitor Cart must
be hung on the cable holder.
Warning
The Monitor Cart may tilt if it is not put in the defined transport position.
Moving the Monitor Cart
If you need to move the Monitor Cart over an obstacle, you can do this by slightly canting device
and moving it wheel by wheel over the obstacle.
NOTE: Do not lift whole device.
Attached Accessories and Cables During Transport
Consider the weight of the below items if attached during transport. All other weight must be
removed from the cart.
• Optional: DVD drive for Kick 2 Navigation Station
• Mains power cable
• Ethernet cable
• Potential equalization cable
• Protection cover
• Adapter (USB to Ethernet)
• EM Tracking Unit
• EM Power Data Cable
• EM Power Supply
• EM Holder
How to Attach the Monitor Protection Cover
Step
1. Shut down, turn off and unplug the system.
2. After the monitor has cooled down, clean the touchscreen.
3. Pull the monitor protection cover over the monitor.
ASSEMBLY, TRANSPORT AND STORAGE
System and Technical User Guide Rev. 1.0 Kick 2 Navigation Station Ver. 1.1 73