Brainlab KICK 2, System And Technical User Manual

Page: 32 / 136

Connection Panel
①
⑤
③
②
④
⑥
⑦
⑤
⑧
Figure 3
No. Component
①
Mains power
②
Potential equalization
③
DVI (Video In)
④
SDI (Video In)
⑤
Ethernet
⑥
USB 3.1
⑦
USB for WLAN
⑧
DP (Video Out)
Warning
Additional equipment connected to medical electrical equipment must comply with the
respective IEC or ISO standards (e.g., IEC 60950 for data processing equipment and IEC
60601-1 for medical equipment). Furthermore, all configurations shall comply with the
requirements for medical electrical systems (see IEC 60601-1-1 or clause 16 of the 3rd
edition of IEC 60601-1, respectively). Anyone connecting additional equipment to medical
electrical equipment configures a medical system and is therefore responsible that the
system complies with the requirements for medical electrical systems. Please note that
local laws take priority over the above-mentioned requirements. In doubt, consult your
local representative or the technical service department.
Display
The system is not intended for real-time video distribution. Time-critical video sources (e.g.,
endoscope signal) must still be connected to their standard display or other target.
The system has not been tested for diagnostic image quality and may not provide sufficient image
quality or resolution. The touchscreen does not comply with DIN EN6868 and is therefore not
intended for the transmission or display of diagnostic images.
For applications using life supporting or other critical signals, this information must be made
available independent of the
Kick 2 Navigation Station , for example by connecting the signal
directly to a touch display (bypassing device).
Monitor Cart Components
32 System and Technical User Guide Rev. 1.0 Kick 2 Navigation Station Ver. 1.1