System User Guide Rev. 1.6, Planning & Transfer Systems
51
IPLAN NET SERVER
4.4.4
Connecting Redundant Hot-Plug AC Power Supply
Precautions
To reduce risk of personal injury from hot surfaces, allow the power supply or power
supply blank to cool before touching it.
To prevent improper cooling and thermal damage, do not operate system unless all
bays are populated with either a component or a blank.
How to Connect
Steps
1.
Access rear panel.
2.
Remove power supply blank.
3.
Slide power supply into power supply bay.
4.
Connect power cord to power supply.
5.
Route power cord through power cord anchor or cable management arm.
6.
Reposition cable management arm into operating position.
7.
Connect power cord to power source.
8.
Ensure that power supply LED is green.
9.
Ensure that front panel external health LED is green.
Summary of Contents for IPLAN NET SERVER
