Brainboxes 1 Port Rs232 Card, User Manual

Page: 14 / 67

1 Port RS232 Card Chapter 3
•
11
STEP 6: Replace Cover
Now replace the system unit’s cover by carefully sliding it down and over the
system unit. Replace the cover screws.
STEP 7: Reattach All Cables
After attaching all the monitor and keyboard cables, power up the PC. Do not
forget the mains power cable!
The PC should power on in the normal way.
Problems!
If the system fails to power up normally check the following:
1. Ensure that the PC Serial card is installed correctly.
2. Ensure that other cards in the PC have not been upset.
3. Ensure that the power is connected and the PC is switched ON!
If all these have been checked and the PC still does not power up then inspect
the area surrounding the card to ensure that any potentially harmful bits of metal
etc. are not present, if the problem persists ask your dealer to check the card or
contact help@brainboxes.com