Brahler CDSVAN, Operating Instructions Manual

Page: 18 / 32

B8 CDS VAN
18
Copyright by Brähler ICS
Audio Routing
Up to eight B8 can be connected to one DSPxRJ45 card, to provide up to 64 analogues in- and outputs
(please refer to bloc diagram on page 24).
In combination with three DSP6EDAT cards and 24 B8 converters CDSVAN delivers a digital mixing, routing
and effect device for up to 192 channels in studio audio quality.
One B8 control module can operate several B8, or drag a separate B8 control module for each connected B8
into your project window.
The MIDI (red cabling) output of each B8 control module has to be connected to the MIDI input of the EDAT
Dest(ination) pad.
The audio connections (blue cables) are corresponding to the analogue output of the B8.
Example: DSP6 EDAT C Dest In 1 is connected to the first output of the 1
st
B8.
DSP6 EDAT C Dest In 2 is connected to the second output of the 1
st
B8.
DSP6 EDAT D Dest In 1 is connected to the first output of the 2
nd
B8 (connected via LINK).
DSP6 EDAT D Dest In 2 is connected to the second output of the 2
nd
B8.
The last two channels (DSP6 EDAT D Dest In 1 , DSP6 EDAT D Dest In 2 )
can be defined as channel 9 and 10 and so on.
The EDAT X Source pads can be used in the same way, but without any B8 control MIDI wiring.