Brahler CDSVAN, Operating Instructions Manual

Page: 7 / 32

CDS VAN B8
Copyright by Brähler ICS
7
Important remarks
For customers in the EU and in the USA
The equipment has been tested and found to comply with the limits of the CE test. These limits are designed
to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. The equipment generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the user manual it may cause harmful interference to radio
communications. You are cautioned that any changes or modifications not expressly approved in this manual
could void your authority to operate this equipment.
For customers in the United Kingdom
The wires in the main lead are coloured in accordance with the following codes:
Green-and-yellow: Earth
Blue: Neutral
Brown Live
The colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, so please proceed as follows:
The green-and-yellow wire must be connected to the terminal in the plug marked with the letter E or with the
safety earth symbol or marked with green-and-yellow colour. The blue wire must be connected to the
terminal marked with the letter N or marked with black colour. The brown wire must be connected to the
terminal marked with the letter L or marked with red colour.
The equipment must be connected to earth!
Safety
Check that the operating voltage of the unit is identical with the voltage of your local power supply. If a
voltage conversion is required, consult your BRÄHLER ICS dealer or qualified personnel.
Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified
personnel before operating it further. Unplug the unit from the wall outlet or set the Main Power switch to
OFF if it´s not used for several days. To disconnect the cord, pull it out holding the plug. Never pull the cord
itself.
Installation
Allow adequate air circulation to prevent internal heat built-up. Do not place the unit on a surface (rugs,
blankets, etc.) that may block the ventilation holes.
Do not install the unit in a location near heat sources such as radiators or air ducts, or in a place exposed to
direct sunlight, excessive dust or humidity, mechanical vibration or shock.
To avoid moisture condensations do not install the unit where the temperature may rise rapidly.
Cleaning
To keep the cabinet in its original condition, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use organic solvents such as
thinners or abrasive cleaners since these will damage the cabinet.
Repacking
Save the original shipping carton and packing material; they will become handy if you ever have to ship the
unit.
For maximum protection, re-pack the unit as originally packed from the factory.
If not supplied with the equipment, a complete transportation and storage box system is available from
BRÄHLERICS. We recommend you to use this system for long-term protection and care.