Brahler CDSVAN, Operating Instructions Manual, Page: 11 / 32

CDS VAN B8
Copyright by Brähler ICS
11
Operating Controls
Front view
The front side of the B8 is equipped with 3 LED’s per channel to indicate the following items:
- MIC or LINE level selected (MIC if red)
- AF
–(Green LED) audio signal available at analogue input
- PEAK (Red LED) indication for maximum audio level
If your input audio signal often forces the red peak LED to illuminate, please reduce the sensitivity
either of the input (see below) or the output of the connected device. Otherwise you risk to overdrive
the AD converters.
- Phantom power for all microphone level inputs.
-
A Power switch with “power-ON” LED is dedicated on the right hand side of the front panel.
Rear view
The rear side is equipped with:
-
8 analogue inputs XLR/ ¼”
- 8 analogue outputs XLR
- Main power connector
- Ground connector
- 2 EDAT (RJ45) sockets for VAN I/O and LINK
- 3 ADAT
®
sockets for ADAT IN, OUT and TRU
- Wordclock connector (BNC)
- MIDI IN and OUT
- 12 DIP switches for B8 set-up