J5000 Operator’s Guide, Rev. 1.53
27
quality problem is to have backup printheads and cartridges available for
comparison testing. If one color is missing, replace that color cartridge(s). Next
try replacing the printhead.
7.
Defective Printhead/Cartridge Replacement Procedure
.
If you think your Ink Cartridge/Printhead is defective, please contact Brady
Technical support to arrange for a replacement. Brady Technical support may
ask you to perform troubleshooting before sending a replacement cartridge or
printhead.
Notes on Ink Cartridge/Printhead Replacement
•
All replacements for defective cartridges or printheads must be processed
through Tech Support.
•
To receive replacement cartridges, you may be required to send in your
defective cartridges/Printhead.
•
Tech Support will perform the cleaning procedures and tests mentioned
above on all cartridges/Printheads received.
•
Tech Support will not replace cartridges with less than 50% ink remaining.
•
Printheads with zero percent life remaining will not be replaced.
•
Printheads with greater than zero percent life remaining prints may be
replaced depending on the description and circumstances of the failure at
the discretion of Brady Tech Support.
G: Printer Buttons and Lights
Button/Cover Functions:
RESUME/FEED-BUTTON
Printer State
Press Action
SYSTEM IDLE:
Feeds to next label, Cuts the label if cutter enabled. Cuts
current label in LOAD BUTTON CUT MODE.
SYSTEM PAUSED:
Unpauses system
SYSTEM BUSY PRINTING
Retries to correct error or just clears error state
PAUSE/UNLOAD-BUTTON:
Printer State
Press Action
SYSTEM BUSY PRINTING: Pauses system
COVER OPEN:
Unloads stock
SYSTEM PAUSED:
Unpauses system/Resumes printing
CANCEL-BUTTON:
Cancels current job in progress
COVER OPEN SENSOR:
WHEN COVER OPENED:
Pauses current job if active, will finish printing current label.
Moves Carrier to Head Change Position
COVER CLOSED:
If closed after it has been opened the Printer will be in a
pause mode. Press Resume/Feed to continue
BOTTON COMBINATIONS
LOAD-BUTTON and
Hold buttons down until Wireless symbol changes; this will
