BQS BNFIX 123 HB-10, Instructions For Use Manual

Page: 17 / 21

Rev001
32 33
www.babyqs.com
BN FIX 123
Tightening the harness
Pull the straps end straight towards
you, not upwards or downwards.
Please pay attention to the strap end.
Whilst traveling (especially outside the
car) it should always be attached to the
cover.
NOTICE
Make sure the buckle is correctly fastened.
For child safety check that:
• The harness belts are tighten.
• Harness belts are correctly adjusted to the child height.
• Harness belts are neither folded nor twisted.
• Buckle is correctly fastened.
• Harness retains the child by the pelvis and not by the
abdomen.
NOTICE
5. INSTALLATION IN THE vEHICLE GROUP 1. WITH ISOfIx
AND TOP TETHER.
NOTICE
• Please do not leave your child unattended in the child
safety seat in the vehicle.
• For the protection of all vehicle occupants:
In the case of an emergency stop or an accident unsecured
persons or objects may cause injury to other vehicle occupants.
• Always check that:
- The backrests of the vehicle seats are locked (i.e. that a
foldable rear seat bench latch is engaged).
- All heavy or sharp-edged objects in the vehicle (e.g. on the
parcel shelf) are secured.
- All persons in the vehicle have their seats belts fastened.
- The child safety seat is always secured when it is in the
vehicle, even if no child is being transported.
• To protect your vehicle seats
Some vehicle seat covers of sensitive materials (e.g. velour,
leather, etc.) may develop wear marks when child seats are
used. This can be avoided by placing a blanket or towel under
the child seat.
First please check if there are 2 ISOFIX anchorages in the
perpendicular intersection of the vehicle seat back and seat
cushion, and the user-ready tether anchorage behind the vehicle
seat.
Look for this symbol in your vehicle.