English
14
Witbox
User Manual
Attaching the top panel
Remove the plastic protectors from both sides of the top panel and place it on top of
the Witbox. In the box of accessories you will find four screws: place them in the holes
in the corners of the panel and press down on them with your fingers (fig. 2.8).
Attaching the print base
Open the door at the front using the keys you will find in the box of accessories. Cut
the two ties that are attached to the extruder carriage (fig. 2.9).
Figure 2.8
Put the top panel in place
Figure 2.9
Cut the two ties
attached to the extruder carriage
