24
Note. The value assigned to each temperature range is
limited to the values of the range just above or below.
For example, if range T3 corresponds to 20°C and
range T1 corresponds to 16°C, the value for range T2
can only vary between16.1°C and 19.9°C. If a different
temperature range for T2 is required, for example
21°C, then the range for T3 must be set at 21.1°C.
8.7-
To change the values for the other temperature
ranges simply repeat the operations described in
points 8.4 and 8.5.
The entire graph for the ‘Daily’ programme reappears to
confirm that programming of the temperature ranges
has been completed.
10 seconds after the last action the unit exits the
procedure and accepts as valid the data inserted up
to that moment.
8.8-
Close the cover.
TH450
TH450
Fig. 34
Fig. 35