Tel 01442 230 800 www.bpt.co.uk
Tel 01442 230 800 www.bpt.co.uk
13
14
OR
In the Main Menu:
Enter ‘2’ then ‘STAR’ ( )
to set entry codes.
*
In the Coded Entry Menu:
Enter ‘1’ then ‘STAR’ ( ) to set relay 1 codes.
*
In the Relay 1 Menu:
Enter ‘1’ then ‘STAR’ ( )
to add new code for relay 1.
*
IDA then says:
“New entry code saved.”
Enter the new code, which may include
Hash and Star. Once you have entered the
last digit of the code, wait 6 seconds for
confirmation the code has been saved.
Enter ‘0’ then ‘STAR’ ( ) to exit configuration
OR
select another option from
Relay 1 menu.
*
Using the Entry Panel’s Keypad, enter 46 followed by the panel’s serial number,
or …
Make a call into the entry panel and once it answers, enter
46
followed by the
panel’s serial number (found on a white label on the back of the main printed circuit
board) to enter into programming. E.G:
46 then 510444
You will now hear the Integrated Digital Assistant (IDA), so follow these voice options:
Using the Entry Panel’s Keypad, enter 46 followed by the panel’s serial number,
or …
Make a call into the entry panel and once it answers, enter
46
followed by the
panel’s serial number (found on a white label on the back of the main printed circuit
board) to enter into programming. E.G:
46 then 510444
You will now hear the Integrated Digital Assistant (IDA), so follow these voice options:
THEN
THEN
THEN
OR
OR: Enter the 3rd,
4th, 5th, 6th & 7th call
forwarding telephone
numbers if required.
In the Main Menu:
“Enter ‘1’ then ‘STAR’ ( )
to set telephone numbers.”
*
“Enter the first phone number followed by
‘STAR’ ( ) or press ‘STAR’ ( ) now to keep:
‘01442 230800’.”
(Programmed from factory with the bpt support line)
*
*
*
“Enter the call button number to be
configured followed by ‘STAR’ ( ).”
(EG: Call button number 1)
*
*
“Enter the calling time in seconds followed
by ‘STAR’ ( ) or press ‘STAR’ ( ) now to
keep the default 30 seconds”
*
*
“Enter the calling time in seconds followed
by ‘STAR’ ( ) or press ‘STAR’ ( ) now to
keep the default 30 seconds”
*
“Enter ‘0’ then ‘STAR’ ( ) to end configuration.”
“Enter the second phone number
followed by ‘STAR’ ( ) ."
(If this is not required press ‘STAR’ to move on )
*
“Enter the next call button number to be
configured followed by ‘STAR’ ( ) ."
(EG: Call button number 2)
*
How to program multiple
analogue call buttons
How to enter or add access
codes for relay 1
GSMVRAK / LANDVRAK
GSMVRAK / LANDVRAK
GSMVRAK/
1-24 call buttons
or
LANDVRAK/
1-24 call buttons
GSMVRAK/
1-24 call buttons
or
LANDVRAK/
1-24 call buttons
