Tel 01442 230 800 www.bpt.co.uk
Tel 01442 230 800 www.bpt.co.uk
11
12
If your Entry Panel looks
similar to this, then
refer to the next 7 pages
for setup instructions…
GSMVRAK/1-24 call buttons
or
LANDVRAK/1-24 call buttons
How to program a one button
analogue call panel
Using the Entry Panel’s Keypad, enter 46 followed by the panel’s serial number,
or …
Make a call into the entry panel and once it answers, enter
46
followed by the
panel’s serial number (found on a white label on the back of the main printed circuit
board) to enter into programming. E.G:
46 then 510444
You will now hear the Integrated Digital Assistant (IDA), so follow these voice options:
THEN
THEN
THEN
OR: Enter the 3rd, 4th, 5th, 6th &
7th call forwarding telephone
numbers if required.
In the Main Menu:
“Enter ‘1’ then ‘STAR’ ( )
to set telephone numbers.”
*
“Enter the first phone number followed by
‘STAR’ ( ) or press ‘STAR’ ( ) now to keep:
‘01442 230800’.”
(Programmed from factory with the bpt support line)
*
*
*
“Enter the call button number to be
configured followed by ‘STAR’ ( ).”
(EG: Call button number 1)
*
*
“Enter the calling time in seconds followed
by ‘STAR’ ( ) or press ‘STAR’ ( ) now to
keep the default 30 seconds”
*
*
“Enter the calling time in seconds followed
by ‘STAR’ ( ) or press ‘STAR’ ( ) now to
keep the default 30 seconds”
*
“Enter ‘0’ then ‘STAR’ ( ) to end configuration.”
“Enter the second phone number
followed by ‘STAR’ ( ) ."
(If this is not required press ‘STAR’ to move on )
*
GSMVRAK / LANDVRAK
GSMVRAK / LANDVRAK
GSMVRAK/
1-24 call buttons
or
LANDVRAK/
1-24 call buttons
