background image

Tel 01442 230 800   www.bpt.co.uk

Tel 01442 230 800   www.bpt.co.uk

1

2

How to use the Entry Panel

1.  Press the call button on the entry panel. - The entry panel will confirm that the call 

is being made by saying: “Please wait while your call is connected”  
(unless this feature has been disabled). 

2.  The 1st telephone number assigned to that call button will then be dialled, 

followed by the 2nd telephone number in the event that the 1st is not answered 
within the allocated timed period. (Requires successive call forwarding numbers 
to be programmed to that call button.) Up to 7 call forwarding numbers can be 
programmed into the panel. In the event that an answer phone facility needs to 
be active on any of the called telephones, please ensure that the calling time on 
the entry panel for that number is set for a duration shorter than the time taken 
for the answer phone to activate, otherwise the call forwarding will stop once the 
answer phone picks up the call from the entry panel. The calling time period can 
be set between 10 seconds and 240 seconds. 

3.  Once the call is answered, full communication between the Entry Panel and 

the telephone receiver commences for a maximum timed period of up to one 
minute (talk time). This time period is not adjustable. 

4.  To activate the timed door release relay 1 during communication with the Entry 

Panel the user must enter ‘1’ then ‘#’ or simply ‘#’ on it’s own.  The relay release 
time can be set between 1 second and 256 seconds.  

5.   To activate the timed door release relay 2 during communication with the Entry 

Panel the user must enter ‘2’ then ‘#’. The relay release time can be set between 
1 second and 256 seconds. 

6.  Once the conversation is terminated, the Entry Panel is then ready for the next 

call to be made. 

7.  A user can also dial into the Entry Panel (via its telephone number)  

to open communication and activate the release relays.

HOW TO USE THE ENTRY PANEL

GSM or Analogue Landline

(PSTN) audio only Entry Panel

Up to 24 individual 

(analogue) call buttons

GSMVRA/1 

upto

GSMVRA/24

or

LANDVRA/1 

upto

LANDVRA/24

GSMVRAK/1 

upto

GSMVRAK/24

or

LANDVRAK/1 

upto

LANDVRAK/24

GSM or Analogue

Landline (PSTN) audio  

only Entry Panel

Up to 24 individual 

(analogue) call buttons

Blue illuminated keypad for

up to 400 access codes set

across two relays.

ENTRY PANEL OVERVIEW

Summary of Contents for GSMVRA/1-24











Reviews: