Universal System Manual
Bozzio AG * joysteer®
page 25 of 56
5.3
MMI: Two hand joystick
Important:
Both joysticks must be connected to each other with bars. Otherwise the security
cannot be guaranteed.
The installation is carried out as following:
1. Cut the rods to the required lengths (the rods are delivered excess length)
2. Cut the two rods to two equal lengths each
3. Cut a thread of M5 in the middle of each rod
4. In the centre a threaded rod M5 is placed, tightened with locknuts on both ends and
secure with Loctite 243. This is the set point for fracture for the airbag deployment.
5. Mount to the swivel heads with lock nuts. Secure with Loctite 243
For demo vehicles it is recommended to make the rods extendable in length.