15
STORAGE
1. To store the 3 IN 1 Rower/Recumbent Bike & Strength Trainer simply keep it in a clean dry place.
2. To avoid damage to the electronics meter, remove the batteries before storing the 3 IN 1 Rower/
Recumbent Bike & Strength Trainer for one year or more.
3. Move the 3 IN 1 Rower/Recumbent Bike & Strength Trainer with the moving wheels on the Front
Stand. Grasp the Rail Cap to move the 3 IN 1 Rower/Recumbent Bike & Strength Trainer. Do not
use the Seat to move the 3 IN 1 Rower/Recumbent Bike & Strength Trainer. The Seat will move
and the Seat Carriage may pinch your hand or fingers.
4. Follow the following process to fold the 3 IN 1 Rower/Recumbent Bike & Strength Trainer as
illustrated for easy storage.
a. Adjust and lock the seat in position with at least one adjustment hole visible in front of the seat.
NOTE:
This will prevent the seat from damaging the covers.
b. Remove the
PULL PIN (63)
and swing the
REAR SUPPORT (62
) toward the front.
NOTE: This will allow you to pull out the RELEASE KNOB (59) easily.
c. Pull out the
RELEASE KNOB (59)
and fold up the
RAIL (52)
. Make sure the
RAIL (52)
is locked
securely in folded position by using
RELEASE KNOB (59)
.
d. Lock the
REAR SUPPORT (62)
in folded position with the
PULL PIN (63)
.
UNFOLD THE ROWER, RECUMBENT BIKE & STRENGTH TRAINER
a. Pull out the
RELEASE KNOB(59)
and unfold the
RAIL(52)
. Make sure the
RAIL (52)
is locked
securely in the unfolded position by using
RELEASE KNOB (59)
.
b. Remove the
PULL PIN (63)
and swing the
REAR SUPPORT (62)
backward, then lock the
REAR SUPPORT(62)
in position with the
PULL PIN (63)
.
A
B
C D
A
B
Summary of Contents for 3 IN 1 ROWER
Page 20: ...20...
