Before using the Cobalt system
Before using the Cobalt system for the first time, please check the following to ensure the
unit hasn’t been damaged during shipping.
1.
Visually inspect outer casing, plugs and cables to ensure there is no damage.
2.
Slowly rotate the unit to ensure all components are in place and nothing is loose
inside the casing.
If you require assistance or are concerned about the working condition of
the Cobalt system, please email our Service team
or call +44(0)845 643
2874.
Safety instructions
The system complies with Part 15, of the FCC Rules, which declares;
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The Cobalt system has been engineered to ensure a safe working environment for the
operator at all times. With safety in mind, we have tested and will continue retesting the
Cobalt system to ensure we provide the safest system on the market.
Follow these safety precautions when using the Cobalt system:
•
Do NOT power on the units without antennas connected to both antenna ports.
•
Keep all ventilation holes clear and unblocked. Ensure that proper ventilation is
provided at all times when in use.
•
Use anti-static packing materials when transporting the unit. Standard packing
materials may damage the units if used.
•
Do NOT insert objects of any kind into the ventilation holes as this may result in
damage to the unit
•
Do NOT use when wet and provide adequate cover when using in the rain.
•
Do NOT use liquid cleaners or aerosol cleaners on the unit. Use a damp cloth for
cleaning.
•
Do NOT disassemble this product. If service or repair is required, contact our
Service team
or call +44(0)845 643 2874.
