Testing system and Systems status indicator
1. Turn the camera on. The LED will flash
GREEN
.
The faster the flashing
GREEN
LED the higher the
quality of the link. There are 3 steps (Slow/Mid/Fast)
See table on next page.
The Cobalt system has an unique function that allows
the cameraman to know the status of the link when
shooting by using this cable attach to the viewfinder.
2. Attach to the CBL115 viewfinder LED cable to the
view finder using the Velcro strap. The other end plugs
into the 12way connector on the side of the
transmitter.
3. If you are not getting a high data rate, try moving
the receiver antennas to a more suitable location to
increase ‘line of site’.
The viewfinder LED is
RED
but displays the same data
rate as the
GREEN
LED on the transmitter and receiver.
(Red is used as it is more visible in daylight).
The same viewfinder LED that is used on the
transmitter, can be used on the receiver to indicate
data rate, just plug it into the 12pin connector.
