Page 34/42
MULCHING MOWER MASTER SERIES | User manual
February 2021
9.2
Servicing schedule
*Action codes: A = Adjustment, I = Inspection, C = Cleaning
For lubrication use good quality NLGI 2 grease with EP properties. This grease is known as a multipurpose grease.
Do not use graphite grease for ball bearings.
The above intervals apply to normal operation. For frequent use, lubricate more often.
Prior to season start
Go through all the points discussed above. The machine has a longer life and is less prone to faults if well serviced.
After season end
Thoroughly clean, lubricate and service the machine. When the machine is dry, we recommend applying a thin coat
of oil to areas where paint has peeled off.
Servicing point
Frequency
Lubrication
Action*
Lubricant
Remark
PTO
Universal joints
(Cross joints)
Every 8 h
Yes
I
NLGI 2
grease
PTO
Profile tube
Every 8 h
Yes
I
NLGI 2
grease
PTO
Retaining pin
Every 8 h
Yes
I
Oil
Screw inspection
(Tight fit)
Initially after 2 h and
then every 40 h
-
I
Bolts and joints
Every 8 h
Yes
I
NLGI 2
grease
Impact guard (if fitted)
Every 8 h
Yes
I
NLGI 2
grease
Condition of hydraulics
including hoses
Every 8 h
-
I
Belt condition, alignment
and tension
Every 10 h
-
I/A
-
Replace if
necessary
Flail shaft and trailing
roller bearing lubrication
Prior to commissioning
then every 8 h
-
I
Angular transmission and
universal shaft to pulley
Initially after 20 h and
then every 100 h
Replace oil
B
SAE
80W90 API
GL5
Fill volume
according to
mower unit type
Grease nipple condition
Every 8 h
-
C/I
Replace if
necessary
Condition of cutting tools
and clean flail shaft and
trailing roller
Initially after 2 h and
then every 8 h, earlier
if vibrating
-
I/C
Replace if
necessary
